· This 433MHz wireless sensor designed to work with your home security systems, this battery-operated PIR motion detector vigilantly stands guard looking for activity and act as intruder or burgular alarm.
· When motion is detected or triggered (by a heat-sensitive Infrared sensor), this PIR sensor wirelessly activates the security system’s siren and starts your auto dial GSM alarm system or push alert to alarm camera system.
· Our motion sensors have built-in smart technology, they detect for both heat and movement. Motion sensors work 24 hours a day, which means they also work in the dark.
· Power: 9V Heavy Duty Battery
· Low power indication, adjustable time for,alarm delay,detecting distance adjustable
· Automatically temp. compensation,anti-RFI & anti-EMI
· Detecting distance: 10m
· Detecting angle:110 degrees”
· Operating Frequency: 433MHz
For insurance purposes:
If your alarm system was not bought with us,we suggest you buy it with your original seller.
We can’t confirm it whether fits to your alarm system!!!
2. How to install
Open the power switch on the side of the detector at first. Mounting height is adjust to 2.2m or so. Mounted on the corner of the room is preferable, and its detecting direction perpendicular to the people walking direction will have best effect.
Mounting method: take out the bracket in the accessories and fix it on your wall, fix the detector to the bracket and adjust its detection angle to best position.
The following aspect should be noted:
1.The infrared detector may not direct to outward window
2.Obstacles on its front have negative effect
3.More than two infrared detectors should not be installed on the same area
4.Strong wind flow, fire, radiator should be avoided, for it may trig wrong alarm message
5.When the infrared detector powered up, it will take five minutes to adapt itself to normal working mode
6.The infrared detector can only used in closed room, not used in open ground
1. PIR sensor can use a 9V battery for 4-6 months.
2. PIR sensor is used to detect object with temperature, detecting room, living room, balcony and so on.
3. Fixing the stent on the wall and install the sensor, the installation height is 1.8-2.2 meter from the ground.
4. After installation, adjust the holder angles to change sensor’s detective range and sensitivity.
5. Avoid installing in the outdoor/place with pet/near to the airconditioner and heat source/direct sunlight place/under the rotation of the object.
ATTENTION: This wireless pir sensor can’t be used independently. It needs to work with a our GSM alarm system or camera alarm system, click below pictures: